Product Detail

Clean Water Every Rinse!** ** Rinsing chamber fills continuously with clean water. Removes Over 99% Bacteria with Just Water* * Removes, does not kill, over 99% of E.coli and Staph. aureus form pre-finished hardwood flooring and ceramic tile using tap water, as tested at an independent accredited lab.

Brand Information

Refill Available

Product Detail

Clean Water Every Rinse!** ** Rinsing chamber fills continuously with clean water. Removes Over 99% Bacteria with Just Water* * Removes, does not kill, over 99% of E.coli and Staph. aureus form pre-finished hardwood flooring and ceramic tile using tap water, as tested at an independent accredited lab.

Preparation & Usage

Instructions 1. Remove clean water tank from the bucket. 2. Ensure water release lever is down in closed position. Remove blue fill cap and fill tank with water. (Optional: Add favorite cleaning solution to water.) 3. After filling, close the blue fill cap and place clean water tank back into bucket. 4. Lift the red water release lever to open. The rinsing chamber will fill with clean water. Red lever can remain open. 5. Place mop inside rinsing chamber. Twist mop to wet/rinse the mop head. 6. Place wet mop inside wringer. 7. Loosely hold handle vertically to allow mop to spin. 8. Push pedal to customize moisture level. 9. Mop floor and repeat steps 5-8 as needed. Use & Care To remove Step on mop strands and tilt handle away from your foot to separate base from mophead. To wash* Machine or hand wash in warm water and lay flat to dry. *Do not use fabric softeners or bleach. To replace Align microfiber mophead with base and push down until it snaps securely in place. For best result, replace refill every 3 months.

Features

2 Tanks Separate Clean and Dirty Water

Extends 24"- 48"

Extendable Handle 51" with mophead attached