Brand Information

A ShopRite® Brand

Preparation & Usage

Directions for Stain Removal: Add to every load with detergent. A chlorine-free and color-safe alternative to chlorine bleach. Mix until completely dissolved. Used mixed solution within 6 hours. Application: Top-Load & HE Washers Fill Scoop to: Line 1-3 and 1-2 Directions: Begin filling washer with proper temperature water for your load (see garment tag). As with detergent, add Oxy Stain Remover to the wash water before adding laundry. Application: Laundry Pre-Treat Fill Scoop to: Line 1-2 per gallon of water Directions: Apply solution to stain. Rub and wait up to 10 minutes. Do not allow to dry on fabric. For laundry, wash as normal with detergent and Oxy Stain Remover. For non-laundry water-washable fabrics and surfaces, blot well with a white towel. Rinse item thoroughly and allow to dry. Repeat as required. Application: Soaking Fill Scoop to: Line 2-4 per gallon of water Directions: Add item. Soak for 1 to 6 hours. Remove item. Rinse thoroughly for non-washable fabric or wash as normal with detergent and Oxy Stain Remover. Application: Carpet Spot Remover Fill Scoop to: Line 1 per gallon of water Directions: Remove excess liquid before treating stain. Apply only enough solution to saturate stain. Allow solution to stand 1 to 5 minutes. Blot well with a white towel. Repeat as required. Rinse well with water and blot thoroughly. Allow to dry, then vacuum. Application: Outdoors Fill Scoop to: Line 4 per gallon of water Directions: Pour or sponge Oxy Stain Remover solution from a bucket onto awnings, siding, decks and lawn furniture. Allow solution to stand 5 to 30 minutes. Scrub as required. Rinse well with cool water. Work small areas so that your solution doesn't dry on the surface. Application: Household Stains Fill Scoop to: Line 1 per gallon of water Directions: For counters, fabric, kitchen floors, trash cans, upholstery, and water washable household surfaces, apply solution to surface or stain. Allow to stand 5-30 minutes. Scrub with sponge or blot with towel. Rinse thoroughly and allow to dry. Application: Tile & Grout Fill Scoop to: Line 4 with water Directions: Mix solution into a gritty paste. Apply with rubber gloves and allow to stand for one hour. Scrub surface and rinse thoroughly with water. Usage Guidelines: 1. Test in an inconspicuous area first. Rinse, then allow to dry. Always follow the manufacturer's instructions for water temperature and for cleaning garment or item. Oxy Stain Remover works best in warm or hot water. Treat stains while fresh. Always rinse well with cool water. Do not place fabric that has not been thoroughly rinsed into dryer. 2. Do not use on wool, wool blends, silk blends, leather or on fabrics labeled dry clean only. Not for use on jewelry, latex paints, woven baskets, unpainted wicker, jute, teak or finished woods. Metals must not be soaked and must be rinsed immediately and thoroughly. No for use on rust, dried paint or bleach damage. Safe for septic tanks. 3. Keep container closed and dry between uses. 4. Some stains will require repeated, longer and stronger treatments. Adding more Oxy Stain Remover powder than directed increases the risk of color loss. If washing in cold water, pre-dissolve Oxy Stain Remover first in 16 oz. of warm to hot water. Add to cold water/wash.

Features

Up to 65 Loads

Bring on all your "oops" moments

Compatible with all clothes washing machines

Chlorine-free

Improved stain removal

Brighter colors

Whiter whites

Powerful stain fighter