Product Detail

Faster Melting Starts Here®

Product Detail

Faster Melting Starts Here®

Preparation & Usage

Directions for Use: Remove slush and as much loose snow as possible before ice melter application. Spread Jiffy Melt® ice melter evenly across surface area. Apply 1/2 - 1 1/2 cups per square yard, depending on ice thickness and air temperature, as needed. Reapply as necessary. When ice and snow softens, remove slush and any excess ice melter from pavement for good concrete maintenance. Diamond Crystal® Jiffy Melt® blended ice melter may be used to remove snow and ice from concrete sidewalks, parking lots and asphalt surfaces. However, all ice-melting agents work by reducing the freezing point of water. This may result in more frequent freeze-thaw cycling of the melted snow and ice, which can cause surface scaling of concrete. As such, use only on properly placed, cured and sealed, air-entrained concrete. To lessen the possibility of freeze-thaw cycling and potential damage, promptly remove slush as it is formed. Do Not use on porous or improperly cured concrete, concrete less than one year old, precast concrete items, masonry, mortar, wood or other porous materials. As with any ice-melting agent, particular care should be used when grass and vegetation are adjacent to the deicing surface, as excess application may cause damage. Consumer uses this product at his/her own risk.

Features

Melts Ice Down to -10°F/ -23°C

High Melt Capacity

Fast Action Blend

Helps Provide Traction