Command Brand Outdoor Light Clips
Sale Information
Preparation & Usage
Not recommended on rough surfaces, such as cement board, brick or rough-sawn wood. Failure to follow instructions carefully may cause damage. Apply 1. Apply to a smooth, clean and dry surface. Clean with rubbing alcohol. Do not use household cleaners. 2. Separate strips. Remove blue liner. Press adhesive to clip. 3. Remove black liner. Press firmly to surface for 30 seconds per clip. 4. Use one clip for every 2 feet of lights. 5. Wait 1 hour before hanging lights. Remove 1. Gently hold clip in place. 2. Never pull the strip towards you! Always pull straight down. 3. Stretch the strip slowly against the wall at least 6 inches to release. Clips can be reused with Command® Outdoor Small Refill Strips.
Features
Damage-free hanging
Holds strongly
Removes cleanly
Sale Information
Legal
ACTUAL PRODUCT PACKAGING AND MATERIALS MAY CONTAIN ADDITIONAL AND/OR DIFFERENT INGREDIENT, NUTRITIONAL OR PROPER USAGE INFORMATION THAN THE INFORMATION DISPLAYED ON OUR WEBSITE. YOU SHOULD NOT RELY SOLELY ON THE INFORMATION DISPLAYED ON OUR WEBSITE AND YOU SHOULD ALWAYS READ LABELS, WARNINGS AND DIRECTIONS PRIOR TO USING OR CONSUMING A PRODUCT. IF YOU HAVE QUESTIONS OR REQUIRE MORE INFORMATION ABOUT A PRODUCT, YOU SHOULD CONTACT THE MANUFACTURER DIRECTLY. CONTENT ON THIS WEBSITE IS FOR GENERAL REFERENCE PURPOSES ONLY AND IS NOT INTENDED TO SUBSTITUTE FOR ADVICE GIVEN BY A PHYSICIAN, PHARMACIST OR OTHER LICENSED HEALTH CARE PROFESSIONAL. YOU SHOULD NOT USE THE INFORMATION PRESENTED ON THIS WEBSITE FOR SELF-DIAGNOSIS OR FOR TREATING A HEALTH PROBLEM. WAKEFERN FOOD CORP. AND ITS SERVICE PROVIDERS ASSUME NO LIABILITY FOR INACCURACIES OR MISSTATEMENTS REGARDING ANY PRODUCT.